What should I work on next?

13 June 2012

Unnamed Scout Nef Project

  A few shots to see what has been going on. I decided to go with the rope and stanchion railing as suggested by the poll. The first photo shows how I did it. Simply, it is some 1/16" brass tube cut with a razor saw to about 20mm lenght, inserted into holes I drilled in the model with my Dremel. To that, I used superglue to attach some beading cord that looks like braided manila. I had thought to use some small brass rings glued to the stanchions and then run the cord through them, but could not find any that I liked well enough.

Rope Railing Closeup

Upper Hull Section
   You may note the change in color scheme. I decided to match a historical pattern of the Victorian Royal Navy, with black hull, white superstructure, and yellow ochre stack. Also, questioning the use of ventilators. It came with a pair, but I don't know that I want to use them.

   The tail I am considering painting a blue-white-red roundel upon the upper half. Also need to figure out how to do a decal for the name - which I need to decide upon! Check out the poll for that, please!

Tail section assembled, needing more paint. Roundel?

Newest Lower Hull. Help from a Mad Man in a Blue Box?

   Changed the lower hull plan from the original idea. Originally it had two resin portholes on each side, but the starboard pair were damaged at some point, so I cut them all off. Then I added round gunports over the four portholes, going to fit each with a Hotchkiss rotary cannon. But once I looked at it, I decided that it was over-gunned at that point. Cut off those ports, added a washer to each side for a single porthole - that's the engineering area, not a passenger lounge, after all!

  Plenty of work still to go. Need to finish cutting the stanchions for the main deck's railing, finish painting the deck gun and the Nordenfelt for the pilot house deck, need to make a hatch for the roof of the pilot house, finsih painting the details, and then there is asssembly! Oh, and a line for the ensign, of course! I was thinking smokestack to rear of the armoured boiler box. I've some small-ish eye pins I could set in for that.

4 comments:

Gunbird said...

HMAS Tse-tse?

Tony said...

The Princess Elizabeth

Tony

Elderac said...

It is looking great!

As far as decals are concerned, there is a product available for making decals on a ink-jet printer. We have it available in the local Hobby Lobby. Of course, it is a touch expensive, about $12.00 for the pack. However, if you do a lot of decals, it might be worth the price.

Elderac

J Womack, Esq. said...

I have that somewhere, actually.